
Basic Parameters Product Specifications 22kW Product Model ZD-JLDQ22 Installation Method Kem-mounted/wall-mounted Wiring Method Down in, down out input Voltage AC380V ± 10%, peb-theem tsib-wire system Input zaus 50 ± 1Hz Output Voltage Ib-theem Fais fab AC22 ...
| Basic Parameters | |
| Khoom Specifications | 22 kWm |
| Yam khoom qauv | ZD-JLDQ 22 |
| Txoj Kev Txhim Kho | Kem-mounted / phab ntsa-mounted |
| Txoj kev xaim | Down hauv, down out |
| Input voltage | AC380V ± 10%, peb-theem tsib-xaim system |
| Input zaus | 50 ± 1Hz |
| Cov zis hluav taws xob | Ib-theem AC220V |
| Tso zis zog | 22 kWm |
| Rated Tam sim no | 32 A |
| Cable Ntev | 4/5 m os |
| Human-Computer Interface | Xaiv 4.3-nti touchscreen |
| Overcurrent Protection Tus nqi | ≥35.2A |
| Overvoltage tiv thaiv tus nqi | ≥456V AC |
| Undervoltage Protection Tus nqi | ≥304V AC |
| Txoj Kev Them Nyiaj | Plug thiab Ua Si / Them los ntawm Daim Npav |
| USB | GB/T 20234.1-2015 |
| Charge Settings | Nws pib sau nyiaj / Teem tus nqi / sijhawm |
| Kev sib txuas lus hom | Ethernet, 2/3/4G |
| Muaj nuj nqi tiv thaiv | Overvoltage tiv thaiv, Undervoltage tswb, Overcurrent tiv thaiv, Short-circuit tiv thaiv, |
| Kev tiv thaiv overheat, xob laim tiv thaiv, tiv thaiv kev kub ntxhov, tiv thaiv tam sim no, | |
| Relay adhesion detection, CP nrhiav pom, | |
| Kev nyab xeeb muaj nuj nqi | Kev ntsuas hluav taws xob: AC2kV, rwb thaiv tsev tsis kam:> 10MΩ |
| Ua haujlwm kub | -20 ℃ - + 85 ℃ |
| txheeb ze humidity | 5% -95% tsis-frosting |
| Cia Kub | -40 ℃ - + 70 ℃ |
| Ua haujlwm Altitude | ≤2000 meters (ntau tshaj qhov txwv no yuav tsum tau txo quota) |
| Qib tiv thaiv | IP54 |